TEB1000 series

TEB1000 series

The TEB1000 bioreactor is conceived to allow the user to create experimental set-ups for cell culture under flow conditions. Moreover the temperature and gas concentration conditions required for cell grow and development, the TEB1000 incorporates two integrated peristaltic pumping systems which can be controlled independently. Up to twenty independent flow channels can be set-up in the TEB1000, notably improving the scalability of your experimental set-ups. All the control systems are fully integrated in the TEB1000 removing the need of using external devices, which results in cleaner, cheaper, easier-to-develop and more effective cultures.

Overview
Specifications
Reviews (0)

Overview

The TEB1000 is available with CO₂ control and O₂ hypoxic conditions generation features. Moreover, it integrates all the machinery necessary to generate the appropriate environment for cell development including flow conditions for cell including:

Culture media flow pumping
Temperature control
CO₂ concentration control and
O₂ concentration control

A culture chamber which holds your scaffold in the desired conditions together with other accessories like tubing or a medium reservoir, are the only things necessary to perform a cell culture experiment under flow conditions.

The fully integrated configuration of TEB1000 Master Unit is able to substitute a large number of equipments frequently used for cell culture in Tissue Engineering, like a CO₂ incubators, peristaltic pumps and heaters, since it integrates all their capabilities, allowing a wide variety of experimental set-ups including:

Multiple simultaneous experiments
Controlled flow profiles for cell stimulation experiments or
Experiments under hypoxic conditions

Specifications

TEB1000 flow bioreactor
Temperature control
Temperature range	Room temperature +4 to +50 ºC
Control	± 0.1 ºC
Stability	± 0.1 ºC
Uniformity	≤±0.3 ºC
CO₂ control
Range	0.2-20%
Stability	± 0.1 ºC
Service pressure	0.35 bar
Recuperation (up to 90% of preset value)	0.7 %/min
O₂ control (Optional)
Range	1-19%
Service pressure	1 bar
Pumping system
Number of pumps	Two independent subsystems with electric engines and electronics located outside the internal chamber of the Master Unit, to avoid overheating, reduce the risk of contamination and increase useful volume
Number of pumpheads	Up to 2 pumpheads can be used with each subsystem (4 pumpheads in total)
Compatibility	High flow (HF) and Low flow (LF) pumpheads
HF Pumphead	1 channel pumphead Flow rate: 0.1 to 400 ml/min
LF Pumphead	5 channel pumphead Flow rate: 0.003 to 33 ml/min
Number of channels per pumphead	HF pumphead: 1 channel/pumphead LF pumphead: 5 channel/pumphead
Digital control of flow conditions by means of touchscreen	Real time electronic flow rate control Automatic graph of pump rotation speed Independent control of each subsystem Pre-configured flow profiles Possibility of introducing user-defined complex flow protocols Flow direction can be alternated Pulsatile flow (regulation of frequency and amplitude) Easy-to-use intuitive interface Special flow control module for alternative dynamic perfusion
Power supply and consumption
Power supply	110-220 V, 50-60 Hz, IEC 14 power cord
Nominal power	1800 W
Dimensions
External dimensions [W x D x H]	686 x 803 x 848 mm
Internal dimensions [W x D x H]	540 x 451 x 693 mm
Weight
Weight	120 kg