TEB500 series

The TEB500 series has been specifically conceived to carry out cell culture experiments under flow conditions. Moreover than providing the temperature and gas conditions necessary for cell growth, it incorporates two fully integrated peristaltic pumping systems equipped with multichannel pumpheads. The TEB500 has been designed with a double top door system in order to improve the accessibility to the flow circuits. In addition, it counts on the most advanced autocalibration, remote operation and data logging systems which make it a reliable and robust cell culture equipment.

Overview

The TEB500 series is equipped with CO2 and O2 controls in its standard version and allows the user to:

Control the culture media flow rate

Regulate the inner temperature

Regulate CO2 and O₂ concentrations

The fully integrated configuration of the TEB500 is able to substitute a large number of equipments frequently used for cell culture in Tissue Engineering, like a CO₂ incubators, peristaltic pumps and heaters, since it integrates all their capabilities, allowing a wide variety of experimental set-ups including:

Multiple simultaneous experiments

Controlled flow profiles for cell stimulation experiments or

Experiments under hypoxic conditions

Specifications

TEB500 series
Temperature control
Temperature range	Room temperature +5 to +50 ºC
Control	± 0.1 ºC
Stability	± 0.1 ºC
Uniformity	≤± 0.35 ºC
CO₂ control
Range	0.2-15%
Stability	± 0.1 ºC
Service pressure	0.7 bar
O₂ control
Range	1-19%
Service pressure	1 bar
Pumping system
Number of pumps	Two independent subsystems with electric motors and electronics located outside the internal chamber to avoid overheating, reduce the risk of contamination and increase useful volume
Number of pumpheads	1 multichannel pumphead per subsystem
Channels per pumphead	4
Flow rate	0.0002-49 ml/min per channel
Front display control
Controlled variables	Temperature, CO₂ and O₂
PC-based interface control
Controlled variables	Temperature, CO₂, O₂ and flow conditions
Flow control	Independent control of each subsystem Three modes of operation: manual, automatic (program) and seeding (alternative dynamic perfusion) Possibility of introducing user-defined complex flow protocols (pulsatility, alternative flow direction, ramps, regulation of frequency and amplitude…) Up to 10 programs can be recorded
Graphical visualization	Yes
Datalogging	Yes
Interface compatibility	Windows and Linux environments
Windows systems requirements	Windows Server 2008, 2012 (64-bit), XP SP3 (32-bit, XP SP2 (64-bit), Vista SP2, 7 or 8 (Desktop) Java Platform Standard Edition 7 RAM: 256 MB; 186 MB for Windows XP (32-bit) Disk space: 250 MB Graphics card: 64 MB Browsers: Internet Explorer 7.0 and above, Firefox 3.6 and above, Chrome Screen resolution: at least 1024 x 768
Linux systems requirements	Oracle Linux 5.5+, Oracle Linux 6.x (32-bit), 6.x (64-bit) Red Hat Enterprise Linux 5.5+, 6.x (32-bit), 6.x (64-bit) Ubuntu Linux 10.04 and above Suse Linux Enterprise Server 10 SP2, 11.x Java Platform Standard Edition 7 RAM: 256 MB Disk space: 100 MB Graphics card: 64 MB Browsers: All OS that support versions Firefox 3.6 and above Screen resolution: at least 1024 x 768
Power supply and consumption
Power supply	110-220 V, 50-60 Hz, IEC 14 power cord
Nominal power	650 W
Dimensions and Geometry
External dimensions [W x D x H]	750 x 741 x 360 mm
Internal dimensions [W x D x H]	650 x 530 x 200 mm [W x D x H]
Internal volume	60 l
Opening system	Double top door construction
Weight
Weight	60 kg

Click to enlarge

Back to products

Category: Flow culture

Control the culture media flow rate
Regulate the inner temperature
Regulate CO2 and O₂ concentrations

Multiple simultaneous experiments
Controlled flow profiles for cell stimulation experiments or
Experiments under hypoxic conditions

TEB500 series
Temperature control
Temperature range	Room temperature +5 to +50 ºC
Control	± 0.1 ºC
Stability	± 0.1 ºC
Uniformity	≤± 0.35 ºC
CO₂ control
Range	0.2-15%
Stability	± 0.1 ºC
Service pressure	0.7 bar
O₂ control
Range	1-19%
Service pressure	1 bar
Pumping system
Number of pumps	Two independent subsystems with electric motors and electronics located outside the internal chamber to avoid overheating, reduce the risk of contamination and increase useful volume
Number of pumpheads	1 multichannel pumphead per subsystem
Channels per pumphead	4
Flow rate	0.0002-49 ml/min per channel
Front display control
Controlled variables	Temperature, CO₂ and O₂
PC-based interface control
Controlled variables	Temperature, CO₂, O₂ and flow conditions
Flow control	Independent control of each subsystem Three modes of operation: manual, automatic (program) and seeding (alternative dynamic perfusion) Possibility of introducing user-defined complex flow protocols (pulsatility, alternative flow direction, ramps, regulation of frequency and amplitude…) Up to 10 programs can be recorded
Graphical visualization	Yes
Datalogging	Yes
Interface compatibility	Windows and Linux environments
Windows systems requirements	Windows Server 2008, 2012 (64-bit), XP SP3 (32-bit, XP SP2 (64-bit), Vista SP2, 7 or 8 (Desktop) Java Platform Standard Edition 7 RAM: 256 MB; 186 MB for Windows XP (32-bit) Disk space: 250 MB Graphics card: 64 MB Browsers: Internet Explorer 7.0 and above, Firefox 3.6 and above, Chrome Screen resolution: at least 1024 x 768
Linux systems requirements	Oracle Linux 5.5+, Oracle Linux 6.x (32-bit), 6.x (64-bit) Red Hat Enterprise Linux 5.5+, 6.x (32-bit), 6.x (64-bit) Ubuntu Linux 10.04 and above Suse Linux Enterprise Server 10 SP2, 11.x Java Platform Standard Edition 7 RAM: 256 MB Disk space: 100 MB Graphics card: 64 MB Browsers: All OS that support versions Firefox 3.6 and above Screen resolution: at least 1024 x 768
Power supply and consumption
Power supply	110-220 V, 50-60 Hz, IEC 14 power cord
Nominal power	650 W
Dimensions and Geometry
External dimensions [W x D x H]	750 x 741 x 360 mm
Internal dimensions [W x D x H]	650 x 530 x 200 mm [W x D x H]
Internal volume	60 l
Opening system	Double top door construction
Weight
Weight	60 kg

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “TEB500 series”

TEB500 series

Overview

Specifications

Reviews

Related products

P3D chambers